Crypto network fees (gas) explained: why you need ETH, TRX, BNB or POL to send USDT

A network fee, called gas on Ethereum, is what you pay a blockchain to process a transaction, and the network charges it in its own coin, not in the token you send. That is why a wallet that holds only USDT cannot send it: it also needs ETH on Ethereum, TRX on TRON, BNB on BNB Smart Chain or POL on Polygon. Add a small amount of the right coin, on the same network, and you can send your USDT.
This guide covers who receives network fees, how gas and TRON Energy work, how to fix “insufficient funds for gas” and what you pay when you withdraw from an exchange. To choose a USDT network first, see our guide to USDT networks.
What is a network fee, and who receives it?
A network fee pays for the work of processing and recording your transaction, and it keeps out spam: Ethereum charges for every computation so that nobody can flood the network for free.1 The fee goes to the network, not to your wallet app. On Bitcoin, it is added to the reward of the miner who creates the block.2 On Ethereum, the tip goes to the validator and the base fee is burned, which removes that ETH from circulation.1 BNB Smart Chain rewards its validators with the fees, paid in BNB,3 and TRON burns TRX when an account lacks the resources that a transaction needs.4
What is gas in Ethereum?
Gas is the unit that measures the computing work that an operation takes on Ethereum.1 Gas fees are paid in ETH, and gas prices are quoted in gwei, one-billionth of an ETH.1 The gas fee is calculated like this:
gas fee = gas units used × (base fee + priority fee)1
- Base fee: set by the protocol for each block. Every transaction must pay it, and it is burned.1
- Priority fee (tip): an extra amount that makes validators choose your transaction. It goes to the validator.1
- Gas limit: the most gas that you allow the transaction to use. Unused gas is returned to you.1
This two-part fee came with EIP-1559,5 in Ethereum’s London upgrade of August 2021.6 A plain ETH transfer needs 21,000 units of gas, and transactions that run a smart contract need more.1 A USDT transfer is one of them, because ERC-20 tokens such as USDT live in a smart contract.7
Why are Ethereum gas fees so high at times?
Fees rise with demand. When blocks are fuller than their target size, the base fee rises, by up to 12.5% per block, and when the network is busy, users offer bigger tips to outbid each other.1
Failed transactions still cost gas
The fee is paid whether a transaction succeeds or fails. If a smart contract runs out of gas halfway, Ethereum reverts the changes, but the gas is still used up.1 So keep the gas limit that your wallet suggests.
TRON: Bandwidth, Energy and the TRC-20 fee
TRON does not use gas. It meters transactions with two resources: Bandwidth pays for the size of a transaction, and Energy pays for running smart contracts.4 Each activated account gets a small free Bandwidth allowance that refills over 24 hours, but there is no free Energy. You get both by staking TRX, and when an account does not have enough, TRX is burned to pay.4
A USDT transfer on TRON calls the USDT smart contract, so it needs Energy: if your account has no Energy, the TRC-20 fee is paid by burning TRX. The amount varies. In TRON’s documentation, a transfer to an address that holds no USDT uses about twice as much Energy as one to an address that already holds some, and heavily used contracts such as USDT can cost more Energy.8 A transfer that runs short of Energy fails with an OUT_OF_ENERGY error and still uses up the Energy available to it.8
BNB Smart Chain and Polygon
BNB Smart Chain is EVM-compatible and charges gas the way Ethereum does, in BNB, its native token.3 Polygon charges gas in POL: in September 2024, POL replaced MATIC as Polygon’s gas token.9 MATIC held on Polygon was converted automatically, but a wallet may still show “MATIC” until you update the network’s currency symbol. POL also exists as a token on Ethereum: to pay fees on Polygon, you need POL on the Polygon network.10
Network fees at a glance
| Network | Fee paid in | Resource model | Typical cause of an “out of gas” error |
|---|---|---|---|
| Ethereum (ERC-20) | ETH | Gas: units × (base fee + tip) | No ETH, too little ETH for current fees, or a gas limit set too low |
| TRON (TRC-20) | TRX, or Energy and Bandwidth from staked TRX | Bandwidth for size, Energy for smart contracts | Not enough Energy and not enough TRX to burn |
| BNB Smart Chain (BEP-20) | BNB | Gas, as on Ethereum | No BNB, or too little BNB for the fee |
| Polygon | POL (formerly MATIC) | Gas, as on Ethereum | No POL on Polygon, for example because it is on Ethereum |
“Insufficient funds for gas”: how to fix it
Wallets word this error in different ways. On Ethereum, node software such as Geth returns “insufficient funds for gas * price + value” when a transaction’s total cost is higher than the account’s balance: the most that the fee can cost, plus any ETH being sent.11 A USDT transfer sends no ETH, so the message means one thing: not enough ETH for the fee. BNB Smart Chain and Polygon charge gas the same way. To fix it:
- Check which network your USDT is on, for example Ethereum or TRON.
- Get a small amount of that network’s coin (ETH, TRX, BNB or POL), for example by withdrawing it from an exchange.
- Receive it at the same address, on the same network as your USDT. A coin on another network cannot pay this fee. Our guide to sending crypto safely shows how to check an address.
- Send the USDT again when the coin arrives, and check the fee before you confirm.
- Keep a little extra for later transfers, because fees change.
Withdrawing from an exchange: who pays the network fee?
When you withdraw from an exchange, the exchange sends the transaction from its own wallet and pays the network fee. It charges you a withdrawal fee instead, which it sets itself and shows before you confirm. When you deposit to an exchange from your own wallet, you are the sender, so your wallet pays the network fee.
Tips to pay less and avoid costly mistakes
- Check the fee before you confirm. Your wallet suggests one, but the choice is yours.1
- If you can wait, avoid busy times. Ethereum fees fall when the network is quieter, and gas trackers show the current price.1
- Never send tokens to a contract address that you do not understand. ERC-20 tokens sent to a smart contract that cannot handle them can be lost for good: more than US$83 million by June 2024, by ethereum.org’s count.7
- Read a transaction before you sign it, and never approve unlimited spending: an unlimited approval could let a smart contract drain your wallet.14
Frequently asked questions
What does “insufficient funds for gas” mean?
Your wallet does not hold enough of the network’s own coin to pay the fee: ETH on Ethereum, BNB on BNB Smart Chain or POL on Polygon. Send a small amount of that coin to the same address, on the same network, and try again.
Why do I need ETH to send USDT?
Ethereum charges every transaction fee in ETH, and a USDT transfer is a transaction that runs the token’s smart contract. Other networks use their own coin: TRX on TRON, BNB on BNB Smart Chain and POL on Polygon.
What is gas in Ethereum?
Gas is the unit that measures the computing work that a transaction needs. You pay for each unit used at the current base fee plus a tip, in ETH.
How much does a TRC-20 USDT transfer cost?
There is no fixed price: it depends on the Energy that the transfer needs and the Energy your account has, and if your account has no Energy, TRX is burned to pay. A transfer to an address with no USDT needs more, so check your wallet’s estimate first.
Related guides: how to send and withdraw crypto safely · cold wallet vs hot wallet · what stablecoins are
Risk warning. Crypto assets are volatile and carry risk. Crypto transfers are irreversible, and the network fee of a failed transaction is not refunded. Stablecoins aim to hold their value but can lose their peg. This article is for educational purposes only and is not financial, investment or legal advice.
Sources
- Ethereum.org, "Ethereum gas and fees: technical overview." https://ethereum.org/developers/docs/gas/ ↩
- Satoshi Nakamoto, "Bitcoin: A Peer-to-Peer Electronic Cash System" (the Bitcoin whitepaper). https://bitcoin.org/bitcoin.pdf ↩
- BNB Chain documentation, "Introduction – BSC Develop." https://docs.bnbchain.org/bnb-smart-chain/introduction/ ↩
- TRON Developer Hub, "Resource Model." https://developers.tron.network/docs/resource-model ↩
- Ethereum Improvement Proposals, "EIP-1559: Fee market change for ETH 1.0 chain." https://eips.ethereum.org/EIPS/eip-1559 ↩
- Ethereum.org, "Timeline of all Ethereum forks (2014 to present)." https://ethereum.org/ethereum-forks/ ↩
- Ethereum.org, "ERC-20 Token Standard." https://ethereum.org/developers/docs/standards/tokens/erc-20/ ↩
- TRON Developer Hub, "Smart contract errors." https://developers.tron.network/docs/smart-contract-errors ↩
- Polygon, "MATIC to POL Migration Is Now Live" (September 4, 2024). https://polygon.technology/blog/matic-to-pol-migration-is-now-live-everything-you-need-to-know ↩
- Polygon Developer Docs, "Migrate to POL." https://docs.polygon.technology/pos/concepts/tokens/matic-to-pol ↩
- go-ethereum (Geth) source code, "core/error.go" (release v1.17.10). https://github.com/ethereum/go-ethereum/blob/v1.17.10/core/error.go ↩
- YimmiT Docs, "Supported Assets." https://docs.yimmit.com/resources/supported-assets ↩
- YimmiT Docs, "Withdraw Crypto." https://docs.yimmit.com/wallets/withdraw-crypto ↩
- Ethereum.org, "Ethereum security and scam prevention." https://ethereum.org/security/ ↩
- U.S. Federal Trade Commission, Consumer Advice, "What To Know About Cryptocurrency and Scams." https://consumer.ftc.gov/articles/what-know-about-cryptocurrency-scams ↩
This article is educational and is not financial, investment, or tax advice. Crypto assets are volatile and carry risk; do your own research and consider a licensed professional before making decisions. About our editorial process.


